A cylindrical conductor of length l and uniform area of crosssection A has resistance R. Another conductor of length 2l and
resistance R of the same material has area of cross section
(a) A/2
(b) 3A/2
(c) 2A
(d) 3A
The proper representation of series combination of cells (Figure) obtaining maximum potential is
(a) (i)
(b) (ii)
(c) (iii)
(d) (iv)
What is the minimum resistance which can be made using five resistors each of 1/5 Ω?
(a) 1/5 Ω
(b) 1/25 Ω
(c) 1/10 Ω
(d) 25 Ω
What is the maximum resistance which can be made using five resistors each of 1/5 Ω?
(a) 1/5 Ω
(b) 10 Ω
(c) 5 Ω
(d) 1 Ω
Identify the circuit Figure in which the electrical components have been properly connected.
(a) (i)
(b) (ii)
(c) (iii)
(d) (iv)
A current of 1 A is drawn by a filament of an electric bulb. Number of electrons passing through a cross section of the filament in 16 seconds would be roughly
(a) 1020
(b) 1016
(c) 1018
(d) 1023
Electrical resistivity of a given metallic wire depends upon
(a) its length
(b) its thickness
(c) its shape
(d) nature of the material
In the following circuits Figure, heat produced in the resistor or combination of resistors connected to a 12 V battery will be
(a) same in all the cases
(b) minimum in case (i)
(c) maximum in case (ii)
(d) maximum in case (iii)
A cell, a resistor, a key and ammeter are arranged as shown in the circuit diagrams of Figure. The current recorded in the ammeter will be
(a) maximum in (i) (b) maximum in (ii)(c) maximum in (iii)(d) the same in all the cases